> ## Documentation Index
> Fetch the complete documentation index at: https://www.carstoragesoftware.com/docs/llms.txt
> Use this file to discover all available pages before exploring further.

# Do a vehicle walkthrough

> Step through an event's checklist, photos, and readings one screen at a time, or run a transport from pickup address to signature.

A walkthrough is the guided, one-step-at-a-time version of an event page. It's built for a phone in the lot: take the photos, tick the checklist, record the readings, and finish. Transport events get their own five-step flow. What each event asks for is set per event type, see [Set up the event walkthrough](https://www.carstoragesoftware.com/docs/events/set-up-the-event-walkthrough.md).

## Open the walkthrough

Open an event from the [Schedule](https://www.carstoragesoftware.com/dashboard/schedule) and turn on **Walkthrough** next to **Page view** at the top, or click **Open walkthrough** in the event's photos. Some event types open the walkthrough automatically. Turn **Walkthrough** off to go back to the full event page, see [Run an event](https://www.carstoragesoftware.com/docs/schedule/run-an-event.md). The same event record is used either way, so nothing is lost.

## Work through the steps

The steps depend on the event type: the screen shows **Step 1 of 3**, a progress bar, and arrows to go back or forward.

**1. Checklist**

Tick each item. Items marked **Required** must be ticked, and the counter shows required items done (for example **Required items 0/6**). Items can be grouped, such as **Wheels & tires** and **Safety**.

**2. Photos**

Click **Add Photo** to use the camera or **Upload** to pick files. If the event type has photo prompts, you're guided through each zone (for example front, rear, interior) one at a time. For an optional photo step, click **Not applicable** if it doesn't apply. Mark damage on a photo if you find any.

**3. Event details**

Enter the **Odometer reading**, **Fuel level**, and **Notes**, depending on what the event type requires. Choose **Customer visible** or **Internal only** for the note.

**4. Finish**

The button at the bottom moves you on. While something required is missing it says what, such as **Complete 6 required checklist items to continue**. Signature and parking steps appear last when the event type asks for them. See [Run an event](https://www.carstoragesoftware.com/docs/schedule/run-an-event.md) for completing the event.

![Internal Service walkthrough on the Checklist step with Step 1 of 3, an overall progress bar, required items 0/6, and items grouped under Wheels & tires and Safety](https://mintcdn.com/carstoragesoftware/QS5Fef4kWSxWDLds/images/access-control/do-a-vehicle-walkthrough-checklist.webp?fit=max\&auto=format\&n=QS5Fef4kWSxWDLds\&q=85\&s=879ed47eb813a308c763a7264acefba3)

**Skip walkthrough**, under the main button, leaves the walkthrough without finishing. Event types can hide it with **No skipping**.

## Run a transport

A **Vehicle Transport** event opens the **Transport Workflow**, a five-step flow. It shows **0 / 5 Complete** and the steps run in order.

**1. Transport Locations**

Search for the **Pickup Location** and **Delivery Location** addresses. They save automatically.

**2. Pre-Transport Photos**

Photograph the car before it moves, then confirm **Complete pre-transport photos?**. This step stays locked until both addresses are set.

**3. Live Tracker**

Click **Start Transport** when the car leaves. The driver's phone shares its location while the status reads **In Transit**. Click **Mark Delivered** on arrival.

**4. Post-Transport Photos**

Photograph the car at delivery and confirm **Complete post-transport photos?**. This step is locked until the transport has ended.

**5. Signature**

Have the customer or driver sign on the screen, then click **Complete Transport Event**. You're asked whether to email the customer, answer for that event.

![Vehicle Transport walkthrough showing 0 of 5 steps complete and the Pickup Location and Delivery Location address fields](https://mintcdn.com/carstoragesoftware/QS5Fef4kWSxWDLds/images/access-control/do-a-vehicle-walkthrough-transport.webp?fit=max\&auto=format\&n=QS5Fef4kWSxWDLds\&q=85\&s=1fc9253160e37b398fbc9fb6d8839a23)

After the event is complete the photo steps become read-only, and the finished page shows **Transport workflow complete** with the before and after photos and the **Transport Route**.

## Troubleshooting

* **A step is greyed out.** An earlier step is unfinished: the alert names it, for example **Complete addresses first**, **Add pre-transport photos first**, or **End transport first**.
* **The finish button won't enable.** Complete the required checklist items, photos, and readings it lists, or ask an admin to relax them in the event type.
* **Location permission denied during a transport.** Allow location for the site in the phone's browser settings so the tracker can share the car's position.

## Related

* [Run an event](https://www.carstoragesoftware.com/docs/schedule/run-an-event.md)
* [Set up the event walkthrough](https://www.carstoragesoftware.com/docs/events/set-up-the-event-walkthrough.md)
* [Start a car session](https://www.carstoragesoftware.com/docs/cars/start-a-car-session.md)


This documentation is built and hosted on [Mintlify](https://mintlify.com), a developer documentation platform.