> ## Documentation Index
> Fetch the complete documentation index at: https://www.carstoragesoftware.com/docs/llms.txt
> Use this file to discover all available pages before exploring further.

# Link a QR code to a car or customer

> Attach a printed QR sticker to a car, customer, event, or link by scanning it, and see what staff get when they scan one later.

A printed QR sticker opens whatever it's linked to: scan a windshield card to open the car, a front-desk card to open the customer. Stickers made in bulk start **Unlinked**, and staff attach them to a car or customer on the spot.

Creating, printing, and exporting codes is covered in [Set up printable QR codes](https://www.carstoragesoftware.com/docs/settings/set-up-printable-qr-codes.md).

## Before you start

* **QR codes** must be on in [Settings → Integrations](https://www.carstoragesoftware.com/dashboard/settings/integrations). Without it a scanned code shows "Not found".
* Linking and unlinking need the **Dashboard** permission, and you must be signed in.

## Link a new sticker by scanning it

**1. Scan the sticker**

Point your phone camera at an unlinked sticker and open the link. The app opens a page with the sticker's label and code, and **Nothing linked**.

**2. Choose what it opens**

Pick **Car**, **Customer**, **Create event**, or **Custom link**. Then choose the car or customer, or paste a **Destination URL** for a custom link. **Create event** needs neither: scanning it later opens a new event, pre-filled with the car or customer if you chose one.

**3. Attach it**

Click **Link QR code**. The page now shows **Linked** with **Open destination**.

![Scan page for an unlinked sticker with Nothing linked and four choices: Car, Customer, Create event, and Custom link](https://mintcdn.com/carstoragesoftware/QS5Fef4kWSxWDLds/images/access-control/link-a-qr-code-scan-page.webp?fit=max\&auto=format\&n=QS5Fef4kWSxWDLds\&q=85\&s=1de85e8a7e7138666c0d58ecc76695b2)

## Link a sticker from a car or customer page

On a car or customer page, click the QR icon at the top right (some layouts label it **QR code**). The **Link a QR code** dialog opens a camera: scan the sticker, or type the code into **Or enter code** and click **Link**. If the sticker is already linked to something else, the app asks **Reassign this QR?** before moving it.

When the record already has a code, the dialog is titled **Linked QR code**. It shows the image, the short link with a copy button, and **Unlink QR** for a sticker that was put on the wrong record. Unlinking leaves the sticker usable: link it again anywhere.

## What scanning does

* A linked sticker opens its car, customer, event form, or link.
* The parking audit's camera mode also reads car QR codes (and VINs) to check a car off at its spot. See [Run a parking audit](https://www.carstoragesoftware.com/docs/parking-spots/run-a-parking-audit.md).
* A deactivated sticker, or any code while **QR codes** is off, shows "Not found".

## Related

* [Set up printable QR codes](https://www.carstoragesoftware.com/docs/settings/set-up-printable-qr-codes.md)
* [Run a parking audit](https://www.carstoragesoftware.com/docs/parking-spots/run-a-parking-audit.md)
* [Add a car](https://www.carstoragesoftware.com/docs/cars/add-a-car.md)


This documentation is built and hosted on [Mintlify](https://mintlify.com), a developer documentation platform.