> ## Documentation Index
> Fetch the complete documentation index at: https://www.carstoragesoftware.com/docs/llms.txt
> Use this file to discover all available pages before exploring further.

# Review door camera activity

> Confirm the cars your door cameras saw arriving and leaving, fix mismatches, and set up the facility cameras that feed the list.

Door cameras watch a doorway, notice a car going in or out, and match it to a calendar event or an approved door entry. The **Vehicle activity** page is where staff confirm those matches and fix the ones the camera got wrong. Matched movements can put drop-offs and pick-ups on the schedule.

## Before you start

* Turn on **Cameras** in [Settings → Integrations](https://www.carstoragesoftware.com/dashboard/settings/integrations?integration=cameras). Turning Cameras on needs the **Schedule** permission.
* You need a camera source: a camera bridge on your network, or UniFi Protect cameras ([Connect UniFi Access and Protect](https://www.carstoragesoftware.com/docs/settings/connect-unifi.md)).
* Staff need the **Schedule** permission to open Vehicle activity.

## Set up facility cameras

Cameras are managed under **Facility cameras** in [Settings → Operations](https://www.carstoragesoftware.com/dashboard/settings/operations#facility-cameras). The section stays empty (**No cameras**) until a bridge or UniFi source is connected. Pairing bridges is under **External camera systems** on the same page, and only team admins who also have the **Door access** permission see **Bridge sources**.

**1. Add the camera**

Under **Cameras**, click **Add camera** (it appears once a camera source is connected). Choose the camera under **Pick a camera** and what it watches, then confirm.

**2. Describe what it watches**

Open the camera and set **Name**, **Location**, and **Watches**: **Door**, **Parking lot**, **Storage bay**, **Perimeter**, or **Other**. For a door camera, set **Position** to **Inside, facing door**, **Outside, facing door**, or **Side view**.

**3. Draw the door line**

For a door camera, click **Draw line** (or **Redraw line**) and mark where cars cross the doorway. The line sets which crossing counts as in or out. If directions come out reversed, use **Flip direction**; **Clear line** removes it.

**4. Turn it on**

Switch on **Watching**. Keep **Alert staff** on to be notified about its movements.

Under **Alerts**, choose which movements notify staff: **All cars**, **Unmatched**, or **Off**.

## Review what the cameras saw

Open [Vehicle activity](https://www.carstoragesoftware.com/dashboard/vehicle-activity). It isn't in the sidebar: reach it from the push notification, from **See car** on a door alert, from a car's activity feed, or from the gear icon's camera settings. The subtitle says **All clear** or how many **need a look**.

The tabs are:

| Tab | Shows |
| - | - |
| **Review** | Movements that need a look. |
| **Unmatched** | Movements with no calendar event or car. |
| **All** | Every movement. |
| **Dismissed** | Movements marked **Not a car**. |

Use **All doors** to filter by camera. Each card shows photo frames from the camera, the direction, and a pill such as **After hours** or **Not on calendar**. Use the buttons on the card:

* **Confirm**: the match is right.
* **Link car** (or **Link to car**): choose the car the camera saw.
* **Log drop-off** / **Log pick-up**: record the arrival or departure on the car when nothing on the calendar matched.
* **More** → **Flip direction**, or **Not a car** to dismiss a false detection.

## Troubleshooting

* **In and out are swapped.** Use **Flip direction** on the card, or redraw the **Door line** so it matches the camera view.
* **The list looks stale.** The page refreshes itself every 15 seconds; the refresh button next to **All doors** reloads it now.

## Related

* [Approve door requests](https://www.carstoragesoftware.com/docs/access-control/approve-door-requests.md)
* [Configure operations settings](https://www.carstoragesoftware.com/docs/settings/configure-operations-settings.md)
* [Review car activity, notes, and photos](https://www.carstoragesoftware.com/docs/cars/review-car-activity-notes-and-photos.md)


This documentation is built and hosted on [Mintlify](https://mintlify.com), a developer documentation platform.