Before you start
- Turn on Cameras in Settings → Integrations. Turning Cameras on needs the Schedule permission.
- You need a camera source: a camera bridge on your network, or UniFi Protect cameras (Connect UniFi Access and Protect).
- Staff need the Schedule permission to open Vehicle activity.
Set up facility cameras
Cameras are managed under Facility cameras in Settings → Operations. The section stays empty (No cameras) until a bridge or UniFi source is connected. Pairing bridges is under External camera systems on the same page, and only team admins who also have the Door access permission see Bridge sources.1
Add the camera
Under Cameras, click Add camera (it appears once a camera source is connected). Choose the camera under Pick a camera and what it watches, then confirm.
2
Describe what it watches
Open the camera and set Name, Location, and Watches: Door, Parking lot, Storage bay, Perimeter, or Other. For a door camera, set Position to Inside, facing door, Outside, facing door, or Side view.
3
Draw the door line
For a door camera, click Draw line (or Redraw line) and mark where cars cross the doorway. The line sets which crossing counts as in or out. If directions come out reversed, use Flip direction; Clear line removes it.
4
Turn it on
Switch on Watching. Keep Alert staff on to be notified about its movements.
Review what the cameras saw
Open Vehicle activity. It isn’t in the sidebar: reach it from the push notification, from See car on a door alert, from a car’s activity feed, or from the gear icon’s camera settings. The subtitle says All clear or how many need a look. The tabs are:
Use All doors to filter by camera. Each card shows photo frames from the camera, the direction, and a pill such as After hours or Not on calendar. Use the buttons on the card:
- Confirm: the match is right.
- Link car (or Link to car): choose the car the camera saw.
- Log drop-off / Log pick-up: record the arrival or departure on the car when nothing on the calendar matched.
- More → Flip direction, or Not a car to dismiss a false detection.
Troubleshooting
- In and out are swapped. Use Flip direction on the card, or redraw the Door line so it matches the camera view.
- The list looks stale. The page refreshes itself every 15 seconds; the refresh button next to All doors reloads it now.